Free AutoCAD Test: Beginner, Intermediate and Advanced

Free AutoCAD Test: Beginner, Intermediate and Advanced

I have used versions of this test for years in training and hiring conversations. It is not designed to trip anyone up. It is designed to show, in about fifteen minutes, where your AutoCAD foundations are solid and where they are thin: drawing basics, organization and plotting, and the habits that keep a file healthy.

This free test has 30 multiple-choice questions at three levels, with an answer key that explains every answer.


The Short Answer

  • 30 questions: 10 beginner, 10 intermediate, 10 advanced.
  • Take it without help, then check the answer key.
  • Score yourself in bands to see where to study.
  • This is a self-assessment, not a certification.
  • Use the interview and practical test guides to go further.

How This Test Works

  1. Take it without help. Use paper and a pencil for the calculations. Do not look up the answers.
  2. Write your answers down (for example, 1-B, 2-D) before you read the answer key.
  3. Check yourself against the answer key and read every explanation, including those for questions you got right.
  4. Score yourself with the bands below.

This is an informal self-assessment, not a certification, and employers’ tests differ. Software questions describe general behaviour. Menus and features vary by version, so check your employer’s version.


The Test (30 Questions)

Beginner (Questions 1 to 10)

Fundamentals that every drafter should know.

1. Which file extension is the native AutoCAD drawing format?

  • A. DXF
  • B. DWG
  • C. DWF
  • D. PDF

2. What does Ortho mode do?

  • A. Rounds all dimensions to whole numbers
  • B. Restricts cursor movement to horizontal and vertical directions
  • C. Locks all layers
  • D. Switches from model space to paper space

3. Which object snap finds the centre of a circle or arc?

  • A. Endpoint
  • B. Center
  • C. Perpendicular
  • D. Tangent

4. Which command creates a parallel copy of an object at a specified distance?

  • A. COPY
  • B. OFFSET
  • C. ARRAY
  • D. MIRROR

5. In model space, objects are normally drawn at what size?

  • A. Reduced to the plot scale
  • B. Full size (1:1)
  • C. Half size
  • D. Whatever fits the paper

6. What is the main purpose of layers?

  • A. To lock the file against copying
  • B. To organize objects and control their visibility, colour, linetype and plotting
  • C. To increase drawing speed
  • D. To connect drawings to the internet

7. Which command cuts objects back to a cutting edge?

  • A. BREAK
  • B. TRIM
  • C. FILLET
  • D. STRETCH

8. Which key cancels a command in progress?

  • A. Tab
  • B. Esc
  • C. Caps Lock
  • D. F1

9. Which command measures the distance between two points?

  • A. LIST
  • B. DIST
  • C. ID
  • D. REGEN

10. What happens when you MOVE an object?

  • A. A copy stays in the original place
  • B. It is relocated and no copy remains at the original place
  • C. It is deleted
  • D. It is moved to a new layer

Intermediate (Questions 11 to 20)

Organization, plotting and maintenance.

11. What is the difference between an attached and an overlaid xref?

  • A. An overlay can be edited directly; an attachment cannot
  • B. An overlay is permanent; an attachment is temporary
  • C. There is no difference
  • D. An overlay is not included when your drawing is itself referenced into another drawing; an attachment is

12. Which command removes unused layers, blocks, text styles and linetypes?

  • A. EXPLODE
  • B. OVERKILL
  • C. RECOVER
  • D. PURGE

13. What is a CTB plot style table?

  • A. A table that stores coordinate data
  • B. A template of title blocks
  • C. A list of command aliases
  • D. A colour-dependent table that controls plotted appearance by object colour

14. A viewport is set to 1:50 and text must plot 2.5 mm tall. What text height should be used in model space if the text is not annotative?

  • A. 50 mm
  • B. 2.5 mm
  • C. 5 mm
  • D. 125 mm

15. What does the annotative property do for text and dimensions?

  • A. Makes them editable only in paper space
  • B. Protects them from editing
  • C. Converts them to blocks
  • D. Keeps their plotted size consistent across viewports at different scales

16. Which command checks a drawing for errors and can fix them?

  • A. PLOT
  • B. MATCHPROP
  • C. PEDIT
  • D. AUDIT

17. What is a block?

  • A. A locked layer
  • B. A type of dimension
  • C. A saved view
  • D. A named group of objects that can be inserted repeatedly and treated as one

18. What does an associative hatch do?

  • A. Locks the boundary
  • B. Prints on a separate sheet
  • C. Converts to a region
  • D. Updates when the boundary object changes

19. Which command combines connected lines and arcs into one polyline?

  • A. DIVIDE
  • B. BREAK
  • C. LENGTHEN
  • D. JOIN

20. What do fields do in text?

  • A. Spell-check the text
  • B. Convert text to curves
  • C. Lock text to a layer
  • D. Update automatically when the referenced data changes

Advanced (Questions 21 to 30)

Standards, automation and troubleshooting.

21. Which system variable controls how linetypes are scaled in paper space viewports?

  • A. FILEDIA
  • B. PSLTSCALE
  • C. DIMSCALE
  • D. MIRRTEXT

22. In a dynamic block, what is the role of an action?

  • A. It names the block
  • B. It defines how the block geometry changes when a parameter is edited
  • C. It locks the block to a layer
  • D. It exports the block to DXF

23. What does WBLOCK do that BLOCK does not?

  • A. Explodes the selected objects
  • B. Writes selected objects to a separate drawing file
  • C. Locks the objects
  • D. Deletes the objects

24. What is the purpose of OVERKILL?

  • A. To maximize the drawing window
  • B. To remove duplicate and overlapping objects
  • C. To purge layers
  • D. To change object colour by layer

25. You must correct an object drawn at the wrong scale and you know one real distance. Which method is best?

  • A. Rotate, then scale
  • B. SCALE with the Reference option
  • C. EXPLODE and redraw
  • D. Stretch with a window

26. What does the User Coordinate System (UCS) change?

  • A. The drawing units
  • B. The origin and orientation of the XY plane used for input
  • C. The plot scale
  • D. The layer list

27. What is the Sheet Set Manager used for?

  • A. Managing licences
  • B. Organizing layouts and sheet data across a project
  • C. Converting DWG to PDF only
  • D. Storing xrefs in the cloud

28. A drawing opens slowly. Which is the LEAST likely to help?

  • A. Purging unused items
  • B. Changing the cursor colour
  • C. Auditing the file
  • D. Reducing heavy xrefs and hatches

29. What does PUBLISH do?

  • A. Uploads the file to a website
  • B. Plots multiple layouts or sheets in a batch to PDF or a plotter
  • C. Exports to Excel
  • D. Converts blocks to xrefs

30. What is a good reason to use a DWT template?

  • A. To protect the file with a password
  • B. To start each drawing with the office standards for layers, styles and layouts
  • C. To reduce the number of commands
  • D. To lock all objects

Your Score

ScoreWhat it suggests
Under 50%You have gaps in the fundamentals. Study the basics and retake the test in a few weeks
50% to 69%You know the basics but have gaps. Review the explanations for the ones you missed
70% to 84%Solid working knowledge. You are likely ready for most junior and mid-level tasks
85% and aboveStrong command. Prepare for harder practical tasks and interviews

There are 30 questions, so each is worth a little less than 3.3% of the score.

Score each level separately too. If your beginner score is low, fix that before you work on the advanced topics.


Answer Key and Explanations

Beginner (Questions 1 to 10)

1. B. DWG is AutoCAD’s native format. DXF is an exchange format, DWF is a design review format and PDF is a fixed document.

2. B. Ortho constrains the cursor to the horizontal and vertical axes of the current coordinate system, which helps draw straight orthogonal lines.

3. B. The Center object snap snaps to the centre point of circles and arcs.

4. B. OFFSET creates a parallel curve or a concentric copy at a set distance. COPY moves a duplicate without a parallel relationship.

5. B. The common practice is to draw at full size in model space and apply the scale when you set up layouts and viewports.

6. B. Layers group objects so that you can control how they display and plot.

7. B. TRIM removes the part of an object that extends past a cutting edge.

8. B. Esc cancels the current command.

9. B. DIST reports the distance and angle between two points. ID reports the coordinates of a point.

10. B. MOVE relocates the object. COPY leaves the original in place.

Intermediate (Questions 11 to 20)

11. D. Overlays do not nest, which prevents circular reference problems. Attached xrefs are carried along when your drawing is referenced elsewhere.

12. D. PURGE removes unreferenced named items. OVERKILL removes duplicate or overlapping objects.

13. D. A CTB maps plotted lineweight and colour to object colours. An STB uses named plot styles.

14. D. Model height = plotted height × scale denominator, so 2.5 mm × 50 = 125 mm.

15. D. Annotative objects scale automatically with the annotation scale, so that they plot at the intended paper size.

16. D. AUDIT evaluates the integrity of the drawing database and can repair errors. RECOVER is used to open a damaged file.

17. D. Blocks store repeated content, such as symbols, so that it stays consistent and light.

18. D. An associative hatch stays linked to its boundary and updates when the boundary is modified.

19. D. JOIN (or PEDIT with the Join option) merges connected segments into a single object.

20. D. Fields display data, such as dates, file names or sheet numbers, and update when that data changes.

Advanced (Questions 21 to 30)

21. B. PSLTSCALE determines whether linetype scaling in paper space is based on paper space units regardless of viewport scale.

22. B. Parameters define custom properties and actions define how geometry responds to changes in those parameters.

23. B. BLOCK defines a block in the current drawing. WBLOCK writes objects or a block out to a separate DWG file.

24. B. OVERKILL deletes duplicate geometry and combines overlapping lines. It can reduce file size and avoid plotting problems.

25. B. The Reference option lets you give the current length and the correct length, so that the scale factor is computed exactly.

26. B. UCS changes the coordinate system that you use for input and drawing planes.

27. B. Sheet sets group layouts from multiple drawings and manage title block data, numbering and publishing.

28. B. Cursor colour has no effect on file performance. Purging, auditing and reviewing xrefs and hatches can help.

29. B. PUBLISH batch-plots layouts from one or several drawings.

30. B. Templates contain predefined settings so that every new drawing follows the same standard.


What to Do Next

  1. Review the questions you missed in the AutoCAD interview guide: AutoCAD Interview Questions and Answers.
  2. Practise on a real file, cleaning up a messy drawing.
  3. Take the other tests in this series: Free CAD Skills Test (General).
  4. If you are applying for jobs, see CAD Practical Test Guide: What Employers Test and How to Prepare.

Frequently Asked Questions

Is this test official? No. It is a free self-assessment written by a CAD manager.

Which AutoCAD version does it cover? General behaviour that holds across recent versions. Check your employer’s version for menu differences.

Can employers use it? It can help to start a conversation, but it is not a substitute for a practical test.

How often should I retake it? After a few weeks of study or practice, or when you change roles.


Sources

  • No external sources. The test reflects the author’s professional experience as a CAD manager and trainer.

Questions and explanations are the author’s own, based on professional experience. Corrections are welcome.

A test shows you what to practise next. Use it that way.