Most CAD hiring mistakes I have watched came from one of two extremes: no test at all, or a test so long and vague that good candidates walked away. A good test is short, fair and tied to the real job. It takes an hour or less, every candidate gets the same one, and you know in advance what a good answer looks like. This kit gives you four ready-to-use exercises, the answer key and a scoring sheet that you can adapt.
This kit is the author’s professional judgement, written from the employer’s side. It is not legal advice. Hiring rules, including human rights and employment standards, differ by province, so check them with your HR adviser. For the candidate’s side, see CAD Practical Test Guide: What Employers Test and How to Prepare.
The Short Answer
- Use four short exercises totalling about 90 minutes or less: a cleanup, a drawing from a markup, a scale and arithmetic check, and a short communication task.
- Score with a fixed rubric out of 100 (30, 30, 20, 20) that you write before you meet any candidate.
- Give every candidate the same test, the same time and the same instructions.
- Never use live client work or unpaid production work as a test. Use a made-up project.
- Adapt it to the role. A GIS technician does not need a Revit exercise.
- Use the result as one input alongside the interview, the portfolio and the references.
Principles for a Fair CAD Test
| Principle | What it means in practice |
|---|---|
| Tied to the job | Test only what the role really requires |
| Same for everyone | One brief, one time limit, one rubric |
| Short | Under about 90 minutes in total for most junior and mid-level roles |
| Clear instructions | State the software version, the standard and the deliverable |
| Not free labour | Use a made-up project, never real client work |
| Paid or compensated when long | If a test goes beyond a short exercise, consider paying for the time |
| Accessible | Offer reasonable accommodations, and ask before the test whether anyone needs them |
| Scored in advance | Write the rubric first, and score without knowing the candidate’s name where possible |
| Followed by a conversation | Ask candidates to explain what they did |
How to Set It Up
- Choose the software and version the job really uses.
- Build the files once and keep a clean master copy.
- Prepare the answer key and the scoring sheet before you invite candidates.
- Provide a quiet computer with the software and the files, or allow the candidate to use their own with the same files.
- Say how long it takes and what is expected, such as the file name and the format.
- Score the same day while the details are fresh.
Exercise 1: Cleanup and Correction (30 minutes, 30 points)
What it tests: attention to detail, standards and habits.
Prepare: Draw a small floor plan, about 6 m by 4.5 m, with two rooms, a door, a window, dimensions and a title block. Then plant the ten errors below. Give the candidate the file and say:
This drawing was prepared by a junior colleague. Find and correct as many problems as you can in 30 minutes. Keep a list of what you changed. Do not redraw the whole plan.
Answer key (3 points each):
| # | Planted error | A good candidate |
|---|---|---|
| 1 | Text in three different heights | Makes the text consistent with the standard |
| 2 | Some objects drawn on layer 0 | Moves them to the correct layers |
| 3 | Duplicate overlapping lines in one wall | Removes duplicates, for example with an overlap-removal command |
| 4 | A dimension overridden with typed text that does not match the real measurement | Restores the true measurement and notes the issue |
| 5 | A linetype scale that makes the dashed line look solid | Corrects the linetype scale |
| 6 | A sheet number in the title block that does not match the file name | Corrects it or flags it |
| 7 | A door tag that does not match the door schedule | Flags the conflict and asks, instead of guessing |
| 8 | A gap at one wall corner | Closes the corner |
| 9 | A hatch on the wrong layer, with an unclosed boundary | Fixes the boundary and the layer |
| 10 | Several unused layers and blocks | Purges them, and checks that nothing needed is lost |
Bonus signal (not scored): the candidate keeps a written list of changes, and asks about the standard.
Exercise 2: Draw From a Markup (40 minutes, 30 points)
What it tests: accuracy, reading instructions and efficiency.
Brief to give the candidate:
Draw a single-storey rectangular room addition. The outside dimensions are 6,000 mm by 4,500 mm. The walls are 200 mm thick. There is one door, 900 mm wide, centred on the short south wall, and one window, 1,500 mm wide, centred on the long east wall. Show the interior dimensions and the room area. Use your own layers, name them clearly and add a title block with the project name “Sample Addition”, your name and today’s date. Save as a PDF and as a DWG (or the native format for your tool).
Answer key:
| Check | Expected result | Points |
|---|---|---|
| Outside size | 6,000 × 4,500 mm | 4 |
| Interior size | 5,600 × 4,100 mm (outside minus two wall thicknesses) | 6 |
| Room area | 5.6 × 4.1 = 22.96 m² (about 23.0 m²) | 4 |
| Door | 900 mm wide, centred on the short south wall | 4 |
| Window | 1,500 mm wide, centred on the long east wall | 4 |
| Layers and title block | Clear layer names, title block filled in | 4 |
| Files | PDF and native file delivered | 4 |
What to watch for: whether the candidate checks the work, uses the tools efficiently and asks a question if something is ambiguous. If the candidate wonders which wall is “short south”, you have a good sign: they are reading the brief.
Exercise 3: Scale and Arithmetic Check (10 minutes, 20 points)
What it tests: the basic calculations that prevent costly errors. No calculator needed, but allow one if you prefer.
Questions (2 points each):
- A wall measures 84 mm on a drawing printed at 1:50. What is its real length?
- A 12.5 m wall is drawn at 1:100. How long is it on the sheet?
- How many millimetres are in 3 inches?
- A room is 5.2 m by 3.8 m. What is its area?
- A ramp at a slope of 1:20 must rise 0.6 m. How long is the run?
- A road rises at 2% over 75 m. What is the rise?
- Text must plot 2.5 mm tall on a 1:20 drawing. What height should it be at full size?
- A right triangle has legs of 6 m and 8 m. What is the hypotenuse?
- Add the dimension string: 2,400 + 3,100 + 1,850.
- Convert 12′-6″ to millimetres.
Answer key:
| # | Answer | Working |
|---|---|---|
| 1 | 4,200 mm | 84 × 50 |
| 2 | 125 mm | 12,500 ÷ 100 |
| 3 | 76.2 mm | 3 × 25.4 |
| 4 | 19.76 m² | 5.2 × 3.8 |
| 5 | 12 m | 0.6 × 20 |
| 6 | 1.5 m | 0.02 × 75 |
| 7 | 50 mm | 2.5 × 20 |
| 8 | 10 m | 3-4-5 triangle scaled by 2 |
| 9 | 7,350 mm | Sum |
| 10 | 3,810 mm | 12.5 ft × 304.8 mm |
Exercise 4: A Short Communication Task (10 minutes, 20 points)
What it tests: whether the candidate raises problems clearly instead of guessing.
Brief to give the candidate:
The architectural plan shows a 900 mm door at room 104. The door schedule lists the same door as 1,000 mm. The contractor needs to order the door tomorrow. Write a short email to the project lead.
Scoring guide:
| Element | What to look for | Points |
|---|---|---|
| States the problem | Names the room, the two sheets and the two sizes | 5 |
| Does not guess | Asks which is correct, instead of choosing one | 5 |
| States the impact and deadline | Mentions the order tomorrow | 4 |
| Proposes a next step | For example, a quick call or an answer by a set time | 3 |
| Tone and clarity | Short, polite and easy to act on | 3 |
Scoring Sheet
| Exercise | Maximum | Candidate score |
|---|---|---|
| 1. Cleanup and correction | 30 | |
| 2. Draw from a markup | 30 | |
| 3. Scale and arithmetic | 20 | |
| 4. Communication | 20 | |
| Total | 100 |
Reading the total (a guideline from the author’s judgement, not a standard):
| Total | How to read it |
|---|---|
| Under 50 | Significant gaps for most roles |
| 50 to 69 | Trainable for a junior role if the interview supports it |
| 70 to 84 | Solid for most junior and mid-level roles |
| 85 and above | Strong. Check that the level of the role will keep them engaged |
Set your own threshold before the first test, and do not change it for a favourite candidate.
Adapting the Kit to the Role
| Role | Emphasize | Adapt |
|---|---|---|
| Junior drafter | Exercises 1 and 3 | Keep the time short |
| Architectural or MEP drafter | Exercises 1 and 2 | Use a building plan |
| Revit modeler | Exercise 2 in a BIM tool | Ask for a model, a sheet and a schedule |
| Civil technician | Exercises 2 and 3 | Use a short road or site task |
| GIS technician | Exercises 3 and 4 | Replace Exercise 1 with a data cleanup task |
| Mechanical designer | Exercises 2 and 3 | Replace the plan with a simple part and tolerance questions |
| CAD or BIM manager | Exercise 4, plus the interview | See CAD Manager Interview Questions and Answers |
After the Test: The Debrief
Ask every candidate the same three questions:
- Walk me through what you did first, and why.
- What would you check if you had more time?
- What was unclear in the brief?
The answers tell you more than the file. Good candidates describe their method, admit uncertainty and notice what could go wrong.
Common Employer Mistakes
- Testing for hours. Good candidates have other offers.
- Using a real project. It is unfair to the candidate and exposes you to disputes.
- No answer key. Scores drift when the standard is vague.
- Testing software the job does not use.
- Ignoring communication. Many drawing errors begin as unspoken questions.
- Not telling candidates the result. A short, respectful reply helps your reputation.
- Treating the test as the only criterion. Use it with the interview and references. See How to Hire a CAD Drafter in Canada: The Complete Employer Guide.
Frequently Asked Questions
How long should a CAD test take? For most junior and mid-level roles, ninety minutes or less in total. Longer tasks should be paid or replaced by a portfolio review and an interview.
Should the test be done at the office or at home? Either can work. A supervised test shows how the candidate works under real conditions. A take-home test is more flexible but easier to receive help with, so ask the candidate to explain the work in a debrief.
Can I use these exercises as they are? Yes, and adapt them to your standard. Please do not publish the answer key where candidates can find it.
Is a skills test legally required or restricted? Not generally required, but hiring practices are subject to human rights and employment rules that differ by province. Ask your HR adviser or the provincial authority.
What about candidates with a strong portfolio? A short exercise and a debrief can still help confirm that they did the work themselves.
Sources
- No external sources. The exercises, answers and scoring guidance are the author’s professional judgement. The scale and arithmetic answers can be checked by anyone.
A fair, short test with a clear key saves you from bad hires and spares good candidates a bad experience.



