CAD and Drafting Programs in British Columbia: Colleges, Costs and Job Outcomes

CAD and Drafting Programs in British Columbia: Colleges, Costs and Job Outcomes

British Columbia has a different kind of college system from the rest of Canada, and it matters if you are choosing a drafting or technology program. Many of the best-known programs sit in institutions that blend trades, technology and applied degrees, such as BCIT, and the province’s technologist association, ASTTBC, publishes an unusually clear list of the programs it treats as accredited or accepted. That list is one of the most useful documents you can read before you enrol, because it tells you which programs lead directly to the AScT designation.

This guide covers the main CAD, drafting and technology programs in British Columbia, what the published costs look like, how the programs connect to ASTTBC’s designations, what the official data says about jobs and pay, and how to choose. I rely on the colleges’ own pages, ASTTBC’s list and Job Bank, and I mark where something comes from a secondary source.

Programs, fees and accreditation change every year. Confirm every detail with the institution and with ASTTBC before you apply.


The Short Answer

  • Most programs are two-year diplomas in architectural, civil and mechanical technology, with some one-year certificates and technician credentials.
  • ASTTBC maintains a list of accredited or accepted programs. Its June 2025 list includes BCIT’s architectural and building program, Camosun College’s civil and mechanical engineering technology programs, Okanagan College’s civil, mechanical and water engineering technology programs, Selkirk College’s architectural and engineering technology (formerly engineering design and drafting technology) program and Vancouver Community College’s CAD and BIM program, with the years in which each was accepted.
  • AScT requirements: a two-year accredited diploma in applied science or engineering technology, or equivalent, a certification exam and two years of relevant experience with at least one year at the level sought. CTech requires a one-year accredited certificate.
  • Costs for domestic students are moderate. Okanagan College estimates a first-year cost of $7,142 and a total program cost of $14,434 for Civil Engineering Technology in Kelowna, Penticton and Salmon Arm, including mandatory fees. Camosun College lists estimated domestic tuition of about $14,500 to $15,200 for its Civil Engineering Technology diploma for 2026–27.
  • The job market: Job Bank rates the 2025–2027 outlook for drafting technologists in British Columbia as Limited, with about 6,700 people in the occupation. The Lower Mainland had a labour shortage over 2023–2025. WorkBC forecasts about 1,650 openings for drafting technologists and 740 for architectural technologists between 2025 and 2035.
  • Pay: drafting group median $33.65 an hour, architectural technologists $34.31 and civil engineering technologists $38.00, among the highest in the country.

Programs by Institution

The table lists programs I could confirm from the institutions’ pages, from ASTTBC’s list or from public summaries. It is not a complete directory. Check each institution’s own page for current offerings.

InstitutionProgramCredential and lengthNotes
BCITArchitectural and Building Technology2-year diplomaASTTBC’s list shows the architectural and building engineering program as accredited or accepted
BCITArchitectural and Structural CADD and Graphics Technician (architectural option)CertificateShorter route to technician work
BCITMechanical Engineering Technology, Mechanical DesignDiplomaConfirm accreditation on ASTTBC’s list
Okanagan CollegeCivil Engineering Technology2-year diploma, optional co-opTAC accredited at technologist level; students may register with ASTTBC
Okanagan CollegeMechanical Engineering TechnologyDiplomaTAC accredited; bridge into third year of Mechanical Engineering at UBC Okanagan
Okanagan CollegeWater Engineering TechnologyDiploma (co-op)Listed by ASTTBC
Camosun CollegeCivil Engineering Technology4-semester diploma, optional paid co-opStarts each September; on ASTTBC’s list
Camosun CollegeMechanical Engineering TechnologyTechnologist-level programOn ASTTBC’s list; confirm current status
Selkirk CollegeArchitectural and Engineering Technology (formerly Engineering Design and Drafting Technology)Technologist-level programOn ASTTBC’s list
Vancouver Community CollegeCAD and BIM TechnicianDiploma with two specializations; certificate after year oneCertificates: Architectural, Civil/Structural, Steel Construction Modelling or Mechanical Drafting Technician

Reading notes. Okanagan College describes its Civil Engineering Technology diploma as a two-year program accredited by Technology Accreditation Canada at the technologist level, with students able to register with ASTTBC. Its Mechanical Engineering Technology diploma is also TAC accredited, with a bridge into the third year of the Mechanical Engineering degree at UBC Okanagan, a useful route if you may want to become an engineer later. Camosun’s civil program runs over four semesters starting each September, with optional paid co-op terms. Vancouver Community College’s CAD and BIM Technician diploma has two specializations and lets you exit after the first year with a certificate: Architectural Technician, Civil/Structural Technician, Steel Construction Modelling Technician or Mechanical Drafting Technician.


ASTTBC and What the Programs Lead To

ASTTBC grants the Applied Science Technologist (AScT) and Certified Technician (CTech) designations. Its public requirements:

  • AScT: a two-year accredited diploma in applied science or engineering technology, or equivalent, and a certification exam.
  • CTech: a one-year accredited certificate, or equivalent, and a certification exam.
  • Experience: two years of relevant experience, with at least one year at the level of certification sought, according to public guides to ASTTBC.

Graduates may join as graduate or trainee registrants while they gain the experience. The titles AScT and AScT trainee are protected titles under British Columbia’s professional governance legislation. The Architectural Institute of BC also has a registration pathway for architectural technologists.

Use ASTTBC’s approved programs list. It records, for each program, whether it is accredited or accepted as accredited, and for which years. A program that was accepted in earlier years but is not listed for later years may not lead directly to the AScT, so check the current list. See Technologist Certification in Canada: C.Tech., C.E.T., AScT and Provincial Associations Explained.


Costs for Domestic Students

Institution and programPublished domestic figures
Okanagan College, Civil Engineering Technology (Kelowna, Penticton, Salmon Arm)Estimated first-year cost $7,142; estimated total program cost $14,434; fees include activity, health and dental, student association, technology and development fees
Camosun College, Civil Engineering TechnologyEstimated tuition for September 2026 to August 2027 listed at $14,514 and $15,233 for domestic students; the page notes that domestic fees vary with the courses selected

What this means. Two years at a British Columbia college costs roughly $14,000 to $15,000 in tuition and mandatory fees for domestic students at these two institutions, before books, software, tools, housing and living costs. Housing in the Lower Mainland and Greater Victoria is the largest additional cost; see CAD Salaries by City: Toronto, Vancouver, Calgary, Montréal and Beyond (With Cost of Living). International fees are several times higher. For example, Camosun lists $35,136 and $36,944 for international students.

Student aid applies to eligible students; see Scholarships, Co-op and Funding for Drafting and Technology Students in Canada. StudentAid BC administers provincial loans and grants.


Job Outcomes: What the Data Says

Job Bank. For the drafting group in British Columbia:

  • Outlook 2025–2027: Limited, with about 6,700 people in the occupation and 57% working in architectural, engineering and design services and 11% in construction.
  • Lower Mainland–Southwest Region: outlook Limited, with a labour shortage over 2023–2025, meaning more openings than available workers.

WorkBC. About 1,650 job openings are forecast for drafting technologists and technicians and about 740 for architectural technologists between 2025 and 2035, including replacement of people who leave. WorkBC reports annual earnings of $64,938 for drafting technologists and technicians and $70,036 for architectural technologists.

Pay. British Columbia medians are $33.65 an hour for the drafting group, $34.31 for architectural technologists and $38.00 for civil engineering technologists, with the Vancouver Island and Coast Region reaching $40.13 for civil technologists. See Architectural, Civil and Structural Drafter Salaries in Canada and CAD Drafter Salary in Canada (2026): By Province, Experience and Industry.

Graduate outcome data. I did not verify program-level graduate employment figures for British Columbia institutions, so I do not quote any. Ask each institution for its latest graduate outcomes, and check provincial student outcomes data.

What this means for you. British Columbia pays well, and the Lower Mainland had a tight market recently, but housing costs absorb a large share of pay, and the forward outlook is Limited. Co-op, a strong portfolio and a specialisation (civil, BIM, GIS, mechanical) help. Since November 2023, BC employers advertising publicly must include pay information, and they cannot ask about your pay history, which makes the market easier to read.


How to Choose a British Columbia Program

  1. Start with the ASTTBC approved programs list and confirm the program is accredited or accepted for the year you will graduate.
  2. Pick the discipline: architectural, civil, mechanical or CAD and BIM. See CAD Specializations Compared: Civil, Architectural, Structural, MEP, Mechanical and GIS.
  3. Check the length and exit points: VCC allows a certificate after year one, a useful option if money is tight.
  4. Check co-op: Camosun and Okanagan offer optional paid co-op in civil and mechanical programs.
  5. Check the bridge to a degree if you may want engineering, such as Okanagan College’s mechanical bridge to UBC Okanagan.
  6. Compare the real costs, including housing.
  7. Ask about software and labs (Civil 3D, Revit, SolidWorks and others).
  8. Think about where you want to work. Studying in the Okanagan or on the Island builds local contacts, while the Lower Mainland has the largest employer base.
  9. Consider the first-year certificate route if you want to start working earlier.

For the national picture, see Best CAD and Drafting Programs in Canada: The Complete College Guide.


Common Mistakes

  • Not checking ASTTBC’s list. A program that does not lead to the AScT may limit you later.
  • Ignoring co-op and the bridge options.
  • Underestimating housing costs.
  • Assuming all CAD programs are equal. Some are technician-level, some technologist-level.
  • Choosing only on price. The cheapest route may not serve your goals.
  • Not building a portfolio during the program. See CAD Portfolio Guide: Structure, Examples, Template and Checklist.

Frequently Asked Questions

How long are drafting and technology programs in British Columbia? Mostly two years for diplomas, with some one-year certificates and technician credentials.

Which British Columbia programs lead to the AScT? Those on ASTTBC’s approved list, for example BCIT’s architectural and building program, Okanagan College’s civil and mechanical programs and Camosun’s civil program. Check the current list.

How much does a program cost? For domestic students, about $14,000 to $15,000 in tuition and mandatory fees over two years at Okanagan College and Camosun, before living costs.

Can I go on to an engineering degree? Some programs have bridges, such as Okanagan College’s mechanical bridge to UBC Okanagan.

Is there a shortage of drafters in British Columbia? Job Bank reported a labour shortage in the Lower Mainland over 2023–2025, but rates the forward outlook as Limited, so it depends on the region and your skills.

What does a graduate earn? The BC median for drafting technologists is $33.65 an hour and for architectural technologists $34.31. Entry-level pay is lower: see CAD Drafter Salary in Canada (2026): By Province, Experience and Industry.


Sources

Program lists, fees and accreditation change every year. BCIT program descriptions come from public summaries and ASTTBC’s list: confirm with BCIT.

A good program in British Columbia is one that ends in a designation, a job and a place you can afford to live. Check all three.