Employers often ask me whether they can hire a talented drafter from abroad, and how long it will take. The honest answer starts with a question: can the person get a work permit without a Labour Market Impact Assessment, or does your firm need one? The rules change often, the fees are real, and a mistake can cost months. This guide gives an overview, with figures I checked in secondary sources, and tells you when to stop reading and call a professional.
This is general information, not legal or immigration advice. Immigration rules, fees, thresholds and processing times change frequently. Verify every figure on canada.ca and with a licensed immigration lawyer or consultant before you act. Québec has its own selection rules.
The Short Answer
- Two broad routes: hire someone who already has the right to work, or sponsor a worker through an employer-specific work permit, which often requires an LMIA.
- An LMIA decides whether a foreign worker is needed. Employment and Social Development Canada (ESDC) assesses the effect on the Canadian labour market. The fee is $1,000 per position, according to a 2026 employer guide, and an employer cannot recover it from the worker.
- Wage level decides the stream. Positions paid at or above a provincial threshold are high-wage, and the rest are low-wage. The thresholds changed on July 17, 2026.
- Typical drafting wages fall below most thresholds. That puts many drafting hires in the low-wage stream, with caps, longer advertising and tighter rules.
- Some candidates need no LMIA (for example, certain open work permits or exemptions). Ask what authorization the person already has.
- Get professional help, and verify on canada.ca.
Step 1: Does the Candidate Already Have the Right to Work?
Before you consider a sponsored route, ask what the person can already do:
| Situation | What it usually means for you |
|---|---|
| Canadian citizen or permanent resident | No work permit needed |
| Open work permit (for example, some spouse or graduate permits) | The person may work for any employer, subject to the permit conditions |
| Employer-specific work permit for another employer | A new permit and possibly a new LMIA are needed to change |
| International student | May work under study permit conditions, and a post-graduation work permit may follow. Check the current rules |
| Needs a permit and has none | Your options below apply |
Always verify the person’s documents and their conditions. Do not guess, and do not hire someone before you are sure they are authorized. Non-compliance can bring penalties.
Step 2: The Main Routes in Brief
| Route | What it is | What you should know |
|---|---|---|
| LMIA-based work permit | You obtain a positive LMIA, and then the worker applies for a permit | Fees, advertising and wage conditions apply. Timelines vary |
| LMIA-exempt work permits | Some categories do not need an LMIA, for example certain international agreements, intra-company transfers or the International Mobility Program | Eligibility is specific. Ask a professional |
| Global Talent Stream | A faster LMIA stream for certain highly skilled roles | Eligibility is narrow. Check whether drafting roles qualify |
| Express Entry | A federal system for skilled workers seeking permanent residence | Drafting technologists usually sit in TEER 2. Eligibility, points and draws change, so check canada.ca |
| Provincial Nominee Programs | Provinces nominate workers for permanent residence | Each province sets its own streams and criteria |
| Québec | Québec selects its own economic immigrants and issues a Certificat d’acceptation du Québec (CAQ) in addition to federal steps | Ask a professional familiar with Québec |
This table is a general overview, drawn from IRCC and secondary sources, and it is not a substitute for current official information.
Step 3: Which LMIA Stream? The Wage Thresholds
For the high-wage and low-wage streams, ESDC compares the offered hourly wage with a provincial or territorial threshold. A 2026 report puts the threshold at the provincial median wage plus 20%, with new values applying from July 17, 2026.
Here are the new thresholds next to the drafting-technologist median wage from Job Bank (November 2025 release):
| Province | LMIA threshold from July 17, 2026 | Drafting median (NOC 22212) | Drafting median compared with the threshold |
|---|---|---|---|
| Alberta | $37.50 | $36.00 | Below |
| British Columbia | $38.40 | $33.65 | Below |
| Manitoba | $31.33 | $30.03 | Below |
| New Brunswick | $31.73 | $30.00 | Below |
| Newfoundland and Labrador | $33.60 | $36.00 | At or above |
| Nova Scotia | $31.96 | $29.85 | Below |
| Ontario | $36.92 | $31.25 | Below |
| Prince Edward Island | $31.20 | Not published | n/a |
| Québec | $36.00 | $29.81 | Below |
| Saskatchewan | $34.62 | $35.78 | At or above |
Thresholds are as reported by Moving2Canada on the July 2026 change. Drafting medians are Job Bank medians from the release of November 19, 2025, and some provincial values are model-based estimates (see CAD Salary Benchmarks for Employers (2026)). Prince Edward Island’s drafting median is not published. Verify the thresholds on canada.ca, because the secondary source I used shows an inconsistent table header.
What it means: at the median, most provinces’ drafting wages sit below the threshold, so a typical drafting position would fall under the low-wage stream. Your specific offer decides, not the median. A GIS analyst or a senior role paid well above the threshold may be high-wage. Your wage must also meet the Job Bank wage offered to Canadian workers in similar positions, and the program may have its own requirements. Ask your adviser how ESDC sees your offer.
High-Wage vs Low-Wage: Key Rules (As Reported in 2026)
| Topic | High-wage | Low-wage |
|---|---|---|
| Wage | At or above the threshold | Below the threshold |
| Maximum permit length | Up to three years | One year |
| Minimum advertising | Four consecutive weeks within the three months before filing, with at least one national method | Eight consecutive weeks within the three months before filing, including youth-targeted outreach (required from April 2026) |
| Transition plan | Required, to reduce reliance on temporary foreign workers | Not described in my sources |
| Share of workforce | No cap described | Generally 10% of the workforce at a location, or 20% in some sectors. Small employers face smaller limits |
| Regional restriction | Not subject to the unemployment restriction | Not processed in a census metropolitan area where the unemployment rate is 6% or higher |
| Processing time (reported for September 2026) | About 98 business days | About 82 business days |
Temporary measure: through March 2027, one source reports that rural employers outside census metropolitan areas can hire low-wage workers for up to 15% of their workforce.
These points come from two secondary sources and may be out of date. One shows two different dates, so I treat the numbers with caution. Check the current Employment and Social Development Canada instructions before you plan.
The practical effect for many drafting employers is that the sponsored LMIA route is limited, slow and expensive. A firm in a large city with a high unemployment rate may not be able to use the low-wage stream at all.
What Employers Must Show
Roughly, you must demonstrate that:
- The job is genuine and you are able to pay the wage.
- You advertised in the required way and could not find a suitable Canadian or permanent resident.
- You will offer the foreign worker the same wage and conditions as described in the offer, and meet the provincial laws.
- You will comply with the conditions of the stream, including caps and transition plans where required.
IRCC publishes the job offer requirements. Use the official guidance: IRCC: Make a job offer.
Costs and Timeline: A Checklist
| Item | What to ask |
|---|---|
| LMIA fee | $1,000 per position (secondary source), non-refundable, and not recoverable from the worker |
| Worker’s permit fees and biometrics | Paid by the worker or the employer, as agreed and as the rules allow. Check what the rules prohibit |
| Professional fees | Lawyer or consultant: ask for a written quote |
| Advertising | Four or eight weeks of ads, plus your time |
| Processing time | Reported at roughly 82 to 98 business days for the standard streams, plus the work permit time. Check current times |
| Relocation | Optional. Agree it in writing |
| Risk | The application may be refused, and the fee is not refundable |
Professional Advice: When and Who
Use a licensed immigration consultant (RCIC) or a lawyer who is a member of a provincial or territorial law society. Be careful with anyone who promises a result. Ask about their licence, their fees and what happens if the application fails. Unlicensed consultants and recruiters who charge workers illegal fees are a risk to the worker and to you.
Alternatives to Consider
- Hire locally first. Many newcomers already in Canada have permanent residence or an open work permit. See Working as a CAD Drafter in Canada as a Newcomer: The Complete Guide for the candidate’s view and Immigration Pathways for Drafters, Technologists and BIM Professionals: Express Entry, PNP, NOC and TEER for the permanent-residence routes.
- Colleges and co-op programs produce graduates, some with post-graduation permits.
- Outsourcing the work. See In-House vs Outsourced vs Offshore Drafting: A Decision Guide.
- Remote work for a foreign employee has tax and legal implications. Ask a professional.
Common Mistakes
- Hiring first and sorting out the permit afterward.
- Assuming the median wage meets the high-wage threshold.
- Relying on a recruiter’s promise.
- Charging fees to the worker. It can be illegal. Ask your adviser.
- Using old thresholds or fees.
- Forgetting the provincial rules and the Québec steps.
- Ignoring the cost of refusal.
- Discriminating against candidates on prohibited grounds, including origin. Treat applicants fairly.
Frequently Asked Questions
Do I always need an LMIA to hire a foreign worker? No. Some candidates are exempt. Ask which route applies.
How much does an LMIA cost? $1,000 per position as reported in 2026. Check canada.ca.
Can I recover the LMIA fee from the worker? One source says no. Confirm with your adviser.
Will a drafter qualify for a high-wage LMIA? Only if the offered wage reaches the threshold for your province.
Can the worker become a permanent resident? Possibly through Express Entry or a provincial program. That is the worker’s application.
Is there a faster route? The Global Talent Stream is fast for eligible roles, with narrow criteria. Ask whether your role qualifies.
Sources
- Moving2Canada: new LMIA wage thresholds, July 17, 2026
- Concord Visa: LMIA application 2026 employer guide
- IRCC: Make a job offer
- Job Bank: Design and drafting technologist wages (NOC 22212)
Thresholds, fees, caps and processing times come from secondary sources (Moving2Canada and Concord Visa, 2026) and may be out of date or inconsistent. The routes table and the advice are general overviews. Verify everything on canada.ca and with a licensed professional.
Do it by the book, and do it early.



