When a young person in Ontario asks me which college to attend for drafting, design or technology, I give an answer they find unsatisfying: “It depends on which kind of technologist you want to become, which city you want to live in, and what the program leads to when you finish.” Ontario has the largest college system in the country, with more programs in this field than anywhere else, and the differences between them are real but rarely obvious from a brochure.
This guide helps you read those differences. It covers the main program types in Ontario, the colleges that offer architectural, civil and related technology programs, what the published costs look like for domestic students, what the official outcome data says and does not say, and how to check accreditation and designation routes before you apply.
A limit I want to state plainly. Programs, intake dates, fees and accreditation change every year. I verified what I could on the colleges’ and associations’ own pages and from public sources, and I name where a figure comes from. Treat this as a map, then confirm every detail with the college and with OACETT before you apply.
The Short Answer
- Program types: Ontario colleges offer two-year Ontario College Diplomas (technician level) and three-year Ontario College Advanced Diplomas (technologist level) in architectural technology, civil engineering technology and related fields. Many offer optional or mandatory co-op.
- Designation routes: OACETT’s C.Tech. is based on the equivalent of a two-year program and its C.E.T. on the equivalent of a three-year program, plus about two years of experience. Programs accredited by Technology Accreditation Canada make the route easier. Certification is voluntary in Ontario, but some employers require it.
- Domestic tuition is modest compared with other provinces. Mohawk College’s 2026–27 domestic charges for Architectural Technology are $2,560.83 for the first semester and $2,451.07 for the second, $5,011.90 for the first year, including co-op and ancillary fees. Conestoga College lists full-time program tuition of $1,374.96 per term plus fees for Civil Engineering Technology.
- International tuition is several times higher. Mohawk’s total for the first year is $19,754.81 for international students.
- Outcomes: Ontario publishes graduate employment rates six months after graduation for each college and program. The college-wide provincial rate was about 83.6% for 2014–15 graduates and 85.7% for 2016–17 graduates in the Key Performance Indicator reports I verified. Check the current program-level data before you decide.
- The job market is tough in the biggest cities. Job Bank rates the 2025–2027 outlook for the drafting group as Limited in Ontario and Very limited in the Toronto region. A co-op record and a specialisation matter.
Program Types in Ontario
| Credential | Typical length | Level | Typical use |
|---|---|---|---|
| Ontario College Certificate | One year or less | Entry | CAD operator, short upskilling |
| Ontario College Diploma (technician) | Two years | Technician | Architectural Technician, Civil Engineering Technician |
| Ontario College Advanced Diploma (technology) | Three years | Technologist | Architectural Technology, Civil Engineering Technology |
| Ontario College Graduate Certificate | One year, after a degree or diploma | Post-diploma | Specialisation such as BIM or GIS |
Several colleges let you start with a two-year technician diploma and continue into a third year to reach the advanced diploma, for example Algonquin College’s Architectural Technician program, which feeds its Architectural Technology third year, and Sheridan’s equivalent. Admission to the third year usually requires a minimum grade point average and specific course grades, so ask early.
Programs by College
The table lists the programs I could confirm from college pages or public summaries of them. It is not a complete directory, and a college not listed may still offer a similar program. Always check the college’s own page.
| College | Program | Credential and length | Notes from public pages |
|---|---|---|---|
| George Brown | Architectural Technology | Advanced diploma, 3 years (6 semesters) | Described as preparing students for architectural, engineering and construction roles |
| George Brown | Civil Engineering Technology | 3-year program (public summary) | Confirm credential and intake with the college |
| Algonquin | Architectural Technician, then Architectural Technology | 2-year diploma, then a third year to the advanced diploma | Third-year entry requires minimum grades; public summaries describe CTAB accreditation |
| Mohawk | Architectural Technology | Advanced diploma, 3 academic years plus co-op | Credit transfer agreements; 2026–27 domestic fees published |
| Mohawk | Civil Engineering Technology (including a transportation stream) | Advanced diploma, about 3 years | Check streams and campus |
| Humber | Architectural Technology; Civil Engineering Technology | Advanced diplomas, 3 years | Public summaries; confirm accreditation |
| Centennial | Architectural Technology (optional co-op) | Advanced diploma, 3 years | Public summary |
| Fanshawe | Architectural Technology; Civil Engineering Technology | 3-year advanced diplomas | Civil program advertises twelve months of paid co-op |
| Conestoga | Civil Engineering Technology (optional co-op); Architecture – Construction Engineering Technology | 3-year advanced diplomas | Civil: program code 0024, September 2026 start, fees published |
| Seneca | Civil Engineering Technician | 2-year diploma | Public summary |
| Sheridan | Architectural Technician and Architectural Technology | 2-year diploma, then third-year advanced diploma | Described as the third year of the advanced diploma |
Reading notes. The architectural technology advanced diploma at George Brown College is described as a three-year program of six semesters. Fanshawe’s Civil Engineering Technology is described as a three-year advanced diploma with twelve months of paid co-op. Conestoga lists Civil Engineering Technology as a three-year advanced diploma with optional co-op, program code 0024, starting in September 2026. Mohawk’s Architectural Technology is three academic years plus co-op, with credit transfer agreements to other institutions.
Costs for Domestic Students
Ontario colleges publish tuition per semester, plus ancillary fees. From the colleges’ own 2026–27 pages:
| College and program | Domestic tuition per semester | Other fees per semester | Total shown |
|---|---|---|---|
| Mohawk, Architectural Technology | $1,381.12 | Compulsory ancillary fees $924.49 (first semester) and $825.36 (second), co-op fees $255.22 and $244.59 | $2,560.83 and $2,451.07; $5,011.90 for the first year |
| Conestoga, Civil Engineering Technology | $1,374.96 | Technology enhancement fee $110.00, plus program services fee on some intakes | See the college page for the total |
What this means. For a domestic student, tuition and compulsory fees at an Ontario college are on the order of $5,000 a year, before books, software, tools and living costs. Budget separately for housing, transport and any required equipment. International students pay several times more: Mohawk’s first-year total for international students is $19,754.81.
Fees change every year, and programs differ. Use each college’s own cost page, and see Scholarships, Co-op and Funding for Drafting and Technology Students in Canada for student aid. OSAP and the federal grant and loan program apply to eligible students.
Accreditation and Designation Routes
Technology Accreditation Canada accredits post-secondary technology programs, and OACETT ties some routes to graduating from an accredited program or one recognised under an international accord. For the C.E.T., the technology report requirement is satisfied by completing a nationally accredited program. OACETT also states that up to one year of co-op experience may be credited if the program is accredited by Technology Accreditation Canada or the work was supervised by a certified professional.
Public sources describe the three-year Architectural Technology program at Algonquin College as accredited by the Canadian Technology Accreditation Board under the National Technology Benchmarks. I did not verify each college’s current accreditation status, so check the accreditation list on Technology Accreditation Canada’s website and ask the college which OACETT designation its program leads to. See Technologist Certification in Canada: C.Tech., C.E.T., AScT and Provincial Associations Explained.
Job Outcomes: What the Data Says
Graduate employment (Ontario KPI). Ontario’s colleges take part in an annual Key Performance Indicator survey, run six months after graduation. It reports the graduate employment rate, graduate satisfaction and employer satisfaction by college, and the province publishes program-level data. In the KPI reports I verified, the provincial college-wide graduate employment rate was 83.6% for 2014–15 graduates and 85.7% for 2016–17 graduates. The reports warn that college-to-college comparisons can be misleading because of size, local employment conditions and program mix. I did not extract program-level figures for the programs in this guide, so check the Ontario government’s college graduation and job rates page.
Job Bank. For the drafting group, the 2025–2027 outlook is Limited in Ontario (about 11,200 people in the occupation), and Very limited in the Toronto region. In Ontario, 50% of drafting technologists work in architectural, engineering and design services and 11% in construction. See State of CAD, BIM and GIS Hiring in Canada.
Civil technologists have a Moderate 2025–2027 outlook in Ontario (about 7,650 workers), driven, according to Job Bank, by public-sector infrastructure investment and residential construction.
Pay. The Ontario median for drafting technologists and technicians is $31.25 an hour. Architectural technologists have an Ontario median of $28.85 and civil technologists $32.60. See CAD Salaries by Province: Ontario, Québec, BC, Alberta and More Compared.
What this means for you. The programs lead to a crowded market in some cities and a steadier one in others. A co-op record, a strong portfolio and a specialisation (civil, BIM coordination, GIS, mechanical design) are the best protection. Since January 1, 2026, many Ontario employers must show pay ranges in public postings.
How to Choose an Ontario Program
Use this checklist.
- Pick the discipline first: architectural, civil, mechanical or another. See CAD Specializations Compared: Civil, Architectural, Structural, MEP, Mechanical and GIS.
- Check the credential level: a two-year diploma or a three-year advanced diploma. If you want the C.E.T. route, the advanced diploma is the better fit.
- Check accreditation with Technology Accreditation Canada and OACETT.
- Check co-op: mandatory, optional or none, how many terms, how placements are found.
- Check the third-year route if you start with a technician program.
- Check credit transfer if you may want a degree later.
- Look at program-level outcomes in the Ontario KPI data, and ask the college for graduate employer examples.
- Visit if you can, and ask what software and labs you will use. See Which CAD Software Should You Learn First? A Career-Path Decision Guide.
- Compare the real cost using the college’s current fee page.
- Think about location. Studying in the region where you want to work builds your network.
For the national picture, see Best CAD and Drafting Programs in Canada: The Complete College Guide.
Common Mistakes
- Choosing a program without checking accreditation.
- Assuming the two-year and three-year programs lead to the same credential.
- Ignoring co-op.
- Comparing colleges on a single employment number. The KPI reports themselves warn against it.
- Forgetting the real costs beyond tuition.
- Not asking about the third-year route.
- Skipping the portfolio from the first term. See CAD Portfolio Guide: Structure, Examples, Template and Checklist.
Frequently Asked Questions
How long are drafting and technology programs in Ontario? Two years for the technician diploma and three years for the advanced diploma in most architectural and civil programs.
How much does an Ontario college program cost? For domestic students, tuition and compulsory fees are around $5,000 a year at the colleges I checked, before books and living costs. International fees are several times higher.
Do I need an accredited program to become a C.E.T.? It is the most direct route, because it satisfies the technology report requirement. Otherwise, you may need additional assessment.
Which Ontario college is best? There is no single best. It depends on the discipline, the location, co-op, accreditation and your goals. Use the checklist above.
Can I move from a two-year diploma to the three-year one? At some colleges, yes, with grade requirements. Ask the college.
Are graduates employed? Ontario’s college-wide graduate employment rate has been in the mid-80s percent in the KPI reports I verified, and program-level data is published. The market in Toronto is tight, so a co-op record and specialisation matter.
Sources
- Mohawk College: Architectural Technology (2026–27 domestic and international fees)
- Conestoga College: Civil Engineering Technology
- Ontario: College graduation, satisfaction and job rates
- Ontario: College programs, graduation and job rates
- Colleges Ontario: 2015–16 KPI results
- Colleges Ontario: 2017–18 KPI results
- OACETT: Certification file review requirements
- Job Bank: Job outlooks for drafting technologists and technicians, 2025–2027
Program lists, fees and accreditation change every year. Program descriptions for colleges other than Mohawk and Conestoga come from public summaries of college pages and should be confirmed with each college.
Choose the program you could imagine finishing, in the city where you could imagine working. The rest is detail you can check.



