A drafter interview is usually a conversation between two people who both know what a good drawing looks like. The interviewer is not hunting for trivia. They are checking whether you understand the purpose behind each convention: why a layer exists, why a dimension is placed where it is, why a revision is logged. People who understand purpose can adapt to a new standard in a week. People who memorized steps cannot.
This guide gives twelve common questions for CAD drafter roles in Canada, what each one tests and a sample answer. The sample answers are fictional. Adapt them to your own true experience.
The Short Answer
- Expect questions on reading drawings, standards, layers, scales, dimensions and revisions.
- Explain the purpose, not only the command.
- Use real examples from your portfolio.
- Show how you check your own work.
- Expect a short practical test at some employers.
Questions and Answers
1. What does a drafter do day to day?
What they are testing: Whether you understand the job beyond the software.
A strong answer: Describe the cycle: receive sketches or markups, produce or revise drawings to standards, check them, coordinate with engineers or designers and issue the set. Add one real example.
2. How do you read a set of construction or engineering drawings?
What they are testing: Basic literacy.
A strong answer: Start with the title block and index, then general notes and legends, plans, sections, elevations and details, and check how sheets refer to one another.
3. What scale would you use for a floor plan, and what does 1:50 mean?
What they are testing: Fundamentals.
A strong answer: 1:50 means one unit on the drawing equals 50 units in reality, so 1 mm on paper is 50 mm in the building. Common plan scales depend on the project and standard, so I follow the firm’s convention.
4. What is the difference between model space and paper space?
What they are testing: CAD organization.
A strong answer: Model space holds the drawn objects at full size. Paper space holds the sheet layout, viewports at set scales, title blocks and annotation.
5. How do you use layers, and why?
What they are testing: Standards discipline.
A strong answer: Layers separate content by discipline and type so it can be controlled, plotted and coordinated. I follow the project or office layer standard rather than inventing my own.
6. How do you dimension a drawing so it is clear?
What they are testing: Drawing quality.
A strong answer: Dimension each feature once, avoid crossing dimension lines, place dimensions where the feature is clearest and follow the standard’s text height and style.
7. What would you do if a markup contradicts another drawing?
What they are testing: Judgement.
A strong answer: Flag it to the person who gave the markup, show both locations, and do not choose silently.
8. What file formats do you work with, and what are the differences between DWG, DXF and PDF?
What they are testing: Technical literacy.
A strong answer: DWG is the native AutoCAD format. DXF is an exchange format for other software. PDF is a fixed document for review and issue, not an editable CAD file.
9. How do you handle revisions?
What they are testing: Document control.
A strong answer: Use revision clouds and a revision table, update the title block, keep a register, and archive the superseded set.
10. How do you convert between metric and imperial?
What they are testing: Unit awareness.
A strong answer: I check the drawing units first, confirm the project’s convention, and avoid converting by hand. I scale objects only when needed and verify with a known dimension.
11. Tell me about a drawing you are proud of.
What they are testing: Pride in quality.
A strong answer: Choose a sheet from your portfolio, explain the problem and what you did to make it clear.
12. What would you do if you had no work to do?
What they are testing: Initiative.
A strong answer: Ask colleagues if they need help, update templates or libraries, or practise a tool that the team uses.
How to Prepare
- Open the software and practise the answers on a real file.
- Prepare to show, not only tell: bring screenshots or a sample file.
- Review the posting for the tools, versions and standards it names.
- Practise explaining aloud in plain language.
- Prepare your own questions.
For the wider interview process, see CAD Interview Questions and Answers: The Complete Canadian Guide. For the practical test, see CAD Practical Test Guide: What Employers Test and How to Prepare.
Common Mistakes
- Claiming tool skills you cannot demonstrate.
- Not asking about the firm’s standards.
- Giving answers with no real example.
- Forgetting to bring your portfolio.
Frequently Asked Questions
Do I need to know both metric and imperial? Usually yes. Canadian practice mixes them by sector, and employers want to know you can handle both.
Will they ask me to draw something? Sometimes. See the practical test guide.
How do I answer if I do not know? Say what you would check or who you would ask.
Sources
- No external sources. The technical content reflects the author’s professional experience; check your software’s current documentation for version-specific features.
Sample answers are fictional and written only to show structure. Adapt them to your own true experience. Advice reflects the author’s professional judgement as a CAD manager and trainer, and employers vary.
The best drafters explain why. Practise saying it.



